Here you will find all vacuum-controlled parts for your vehicle, from a vacuum pump to a membrane repair kit. Depending on the type of vehicle, a number of vacuum systems can be found in a car. The most important system is the brake system which is activated by the vacuum in the intake manifold or by a vacuum pump. If one of the components in the vacuum circuit in question is not airtight, there will obviously be no vacuum and the system will not function properly. This can vary from a leaky hose or seal to a faulty shuttle valve or non-return valve. All these parts for your vehicle can be found here. If you have any questions or would like advice, please contact our product specialists. They will be happy to assist you.
Here you will find various pressure converters, also called pressure transducers, for your vehicle. A pressure converter is an electrically operated vacuum valve. Examples include a pressure converter for the EGR system, for the power brakes and for the turbocharger. In addition, some vehicles which are more luxurious are equipped with air suspension and also with a pressure converter. Diagnosis of vacuum systems can often prove to be very difficult; consult a professional if necessary.
A shuttle valve is used to guide overpressure or negative pressure to different types of vacuum-controlled parts. This could be, for example, a bypass valve for the braking system or for a vehicle with air suspension or level control.
Here you will find the right membrane repair kit for repairing the vacuum pump in your vehicle. If the membrane is faulty, it will show traces of leakage which will cause the vacuum pump to malfunction. The operation of the vacuum pump can be restored by means of this repair kit.
In this group you will find various vacuum pumps, or negative pressure pumps, for your vehicle. Depending on the type of vehicle, vacuum pumps are used for the brake system, air suspension, central locking and the EGR system.
Find the right vacuum valve, also called the negative pressure switch, for your vehicle here. This valve regulates the supply of the required vacuum in the pipes to control various actuators and control systems. In the event of a defective vacuum valve, these components will be operate at a diminished level or not at all.
Over time, vacuum hoses may leak, causing the vacuum pump to no longer achieve the correct vacuum, with the result that various actuators and control systems will operate less efficiently.
The pressure relief valve opens when too much pressure has built up in a certain system. This could include the turbocharger which is equipped with a pressure relief valve, also called a waste gate. When too much pressure has built up, this valve opens to relieve this pressure. This pressure relief valve is pre-set by means of a spring system so that it opens at a certain value. If a pressure relief valve fails to function, this can be very harmful to the system, as too much pressure can be generated. The downside is when the valve is permanently open and therefore no pressure can be built up.
In this product group you will find the right vacuum pump repair kit for repairing the braking system.
An exhaust switch valve is used to divert exhaust gases in certain situations. For example, various vehicles are programmed to run with the exhaust valve closed due to excessive noise when there is partial load. This exhaust valve then opens at full load or when a certain speed has been reached.
In this category, you can find the right drive pin for a vacuum pump or fuel feed pump. If it is defective or worn out, the vacuum system will not function properly.
Contact our product specialists; they will be happy to work with you to find a solution!
Or order via our web shop.