| Article number | WG1094448 |
|---|---|
| External article number | 71-4033/4 STD |
| Article status | Available |
| Number per pack | 1 |
|---|---|
| Minimum order quantity | 1 |
This connecting rod bearing set from Glyco ensures smooth rotation within your engine's crankcase. It serves as a vital interface between the connecting rods and the crankshaft to minimize friction and wear during operation. By providing a smooth surface for rotation these components allow your engine to transfer power efficiently without excessive heat buildup.
This specific set is configured for four-cylinder engines and includes the necessary shells to service the entire assembly. The supplier code is 71-4033/4 STD. The "STD" designation indicates that these bearings are standard size dimensions intended for crankshafts that have not been machined or ground down to an undersize.
Bearings play a crucial role in supporting the rotating motion of the crankshaft while under heavy load. They facilitate a consistent oil film that separates moving parts and prevents seizing. Replacing worn bearings is often necessary during an engine rebuild to restore proper oil pressure and protect the structural integrity of the crankshaft.
We offer this product from Glyco to support reliable engine maintenance. The application list for this part is extensive and covers a broad spectrum of manufacturers. It is widely used in Fiat models such as the Panda, 500, and Punto. You will also find it fits many Opel vehicles including the Corsa and Astra series. Furthermore the set is compatible with specific models from Suzuki, Lancia, Alfa Romeo, and Ford.
| Width [mm] | 20.0000 |
|---|---|
| Supplementary Article/Supplementary Info 2 | Bronze coated steel back Steel back with sinter-fused bronze |
| Standard Size [STD] | 1 |
| for bearing clearance up to [mm] | 0.0600 |
| Component Number | 71-4033 |
| for housing diameter up to [mm] | 45.7440 |
| for housing diameter from [mm] | 45.7340 |
| for bearing clearance from [mm] | 0.0300 |
| for shaft diameter to [mm] | 42.6000 |
| for shaft diameter from [mm] | 42.5820 |
| Article number | WG1094448 |
|---|---|
| Brand | Glyco |
| External article number | 71-4033/4 STD |
| General information | |
| Article status | Available |
| Availability | |
| Minimum order quantity | 1 |
| EAN | 4044197255511 |
| Packaging length (cm) | 15,000 |
| Packaging width (cm) | 7,500 |
| Packaging height (cm) | 3,800 |
| Packaging weight (kg) | 0,168 |
| 199 A3.000 |
| 199 A3.000 |
| 199 B1.000 |
| 199 B1.000 |
| 199 B4.000 |
| 199 B4.000 |
| 199 B8.000 |
| 199 B8.000 |
| 330 A1.000 |
| 330 A1.000 |
| 955 B2.000 |
| 955 B2.000 |
| 169 A1.000 |
| 169 A1.000 |
| 169 A5.000 |
| 169 A5.000 |
| 188 A8.000 |
| 188 A8.000 |
| 188 A9.000 |
| 188 A9.000 |
| 199 A1.000 |
| 199 A1.000 |
| 199 A2.000 |
| 199 A2.000 |
| 199 A3.000 |
| 199 A3.000 |
| 199 A9.000 |
| 199 A9.000 |
| 199 B1.000 |
| 199 B1.000 |
| 199 B2.000 |
| 199 B2.000 |
| 199 B4.000 |
| 199 B4.000 |
| 199 B8.000 |
| 199 B8.000 |
| 223 A9.000 |
| 223 A9.000 |
| 225 A2.000 |
| 225 A2.000 |
| 263 A2.000 |
| 263 A2.000 |
| 263 A6.000 |
| 263 A6.000 |
| 312 A8.000 |
| 312 A8.000 |
| 312 B1.000 |
| 312 B1.000 |
| 312 B2.000 |
| 312 B2.000 |
| 312 B5.000 |
| 312 B5.000 |
| 330 A1.000 |
| 330 A1.000 |
| 552 66 963 |
| 552 66 963 |
| 552 83 775 |
| 955 B2.000 |
| 955 B2.000 |
| 169 A5.000 |
| 169 A5.000 |
| 188 A9.000 |
| 188 A9.000 |
| 199 A2.000 |
| 199 A2.000 |
| 199 A3.000 |
| 199 A3.000 |
| 199 A9.000 |
| 199 B1.000 |
| 199 B1.000 |
| 312 B1.000 |
| 312 B1.000 |
| 312 B5.000 |
| 312 B5.000 |
| A 13 DTC |
| A 13 DTC |
| A 13 DTE |
| A 13 DTE |
| A 13 DTR |
| A 13 DTR |
| A 13 FD |
| A 13 FD |
| B 13 DTC |
| B 13 DTE |
| B 13 DTN |
| B 13 DTN |
| B 13 DTR |
| D13A |
| Y 13 DT |
| Y 13 DT |
| Z 13 DT |
| Z 13 DT |
| Z 13 DTE |
| Z 13 DTE |
| Z 13 DTH |
| Z 13 DTH |
| Z 13 DTI |
| Z 13 DTJ |
| Z 13 DTJ |
| Z 13 DTR |
| Z 13 DTR |
